Results 1 to 3 of 3

Thread: Mobile Phones Must Known Codes - Very Usefull

  1. #1
    pavan4ufriend
    Guest

    Mobile Phones Must Known Codes - Very Usefull

    Mobile Phones Must Known Codes - Very Usefull

    --------------------------------------------------------------------------------

    1 Imagine ur cell battery is very low, u r expecting an important call and u don't have a charger.

    Nokia instrument comes with a reserve battery. To activate, key is "*3370#"

    Ur cell will restart with this reserve and ur instrument will show a 50% incerase in battery.

    This reserve will get charged when u charge ur cell next time.

    *3370# Activate Enhanced Full Rate Codec(EFR)
    -Your phone uses the best sound quality but talk time is reduced by approx 5%

    #3370# Deactivate Enhanced Full Rate Codec( EFR)

    *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound
    but you should gain approx 30% more Talk Time

    *#4720# Deactivate Half Rate Codec

    2 *#0000# Displays your phones software version,

    1st Line : SoftwareVersion,
    2nd Line : Software ReleaseDate,
    3rd Line : Compression Type

    3 *#9999# Phones software v ersion if *#0000# does not work

    4 *#06# For checking the International Mobile Equipment Identity (IMEI Number)

    5 #pw+1234567890+1# Provider Lock Status.
    (use the "*" button to obtain the "p,w" and "+" symbols)

    6 #pw+1234567890+2# Network Lock Status.
    (use the "*" button to obtain the "p,w" and "+" symbols)

    7 #pw+1234567890+3# Country Lock Status.
    (use the "*" button to obtain the "p,w" and "+" symbols)

    8 #pw+1234567890+4# SIM Card Lock Status.
    (use the "*" button to obtain the "p,w" and "+" symbols)

    9 *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone)

    10 *#21# Allows you to check the number that "All Calls" are diverted To

    11 *#2640# Displays security code in use

    12 *#30# Lets you see the private number

    13 *#43# Allows you to check the "Call Waiting" status of your phone.

    14 *#61# Allows you to check the number that "On No Reply" calls are diverted to

    15 *#62# Allows you to check the number that "Divert If Unrea chable(no service)" calls are diverted to

    16 *#67# Allows you to check the number that "On Busy Calls" are diverted to

    17 *#67705646# Removes operator logo on 3310 & 3330

    18 *#73# Reset phone timers and game scores

    19 *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature
    "SIM Clock Stop Allowed",it means you will get the best standby time possible

    20 *#7760# Manufactures code

    21 *#7780# Restorefa ctory settings

    22 *#8110# Software version for the nokia 8110

    23 *#92702689# (to rember *#WAR0ANTY#)

    Displays -

    1.Serial Number,
    2.Date Made
    3.Purchase Date,
    4.Date of lastrepair (0000 for no repairs),
    5.Transfer UserData.

    To exit this mode-you need to switch your phone off then on again

    24 *#94870345123456789# Deactivate the PWM-Mem

    25 **21*number# Turn on "All Calls" diverting to the phone number entered

    26 **61*number# Turn on "No Reply" diverting to the phone number entered

    27 **67*number# Turn on "On Busy" diverting to the phone number entered

    28 12345 This is the default security code press and hold # Lets you switch between lines

    NOKIA
    Nokia Universal Codes
    Code Description :
    These Nokia codes will work on most Nokia Mobile Phones

    (1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is

    reduced my approx. 5%

    (2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370#

    (3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30%

    more Talk Time.

    (4) *#4720# Deactivate Half Rate Codec.

    (5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release

    Date, 3rd Line : Compression Type.

    (6) *#9999# Phones software version if *#0000# does not work.

    (7) *#06# For checking the International Mobile Equipment Identity (IMEI Number).

    ( #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w"
    and "+" symbols).

    (9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w"
    and "+" symbols).

    (10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w"
    and "+" symbols).

    (11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" Go to Top
    and "+" symbols).

    (12) *#147# (vodafone) this lets you know who called you last.

    (13) *#1471# Last call (Only vodofone).

    (14) *#21# Allows you to check the number that "All Calls" are diverted to

    (15) *#2640# Displays security code in use.

    (16) *#30# Lets you see the private number.

    (17) *#43# Allows you to check the "Call Waiting" status of your phone.

    (1 *#61# Allows you to check the number that "On No Reply" calls are diverted to.

    (19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls
    are diverted to.

    (20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.

    (21) *#67705646# Removes operator logo on 3310 & 3330.

    (22) *#73# Reset phone timers and game scores.

    (23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop

    Allowed", it means you will get the best standby time possible.

    (24) *#7760# Manufactures code.

    (25) *#7780# Restore factory settings.

    (26) *#8110# Software version for the nokia 8110.

    Go to Top

    (27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no

    repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favourite )

    (2 *#94870345123456789# Deactivate the PWM-Mem.

    (29) **21*number# Turn on "All Calls" diverting to the phone number entered.

    (30) **61*number# Turn on "No Reply" diverting to the phone number entered.

    (31) **67*number# Turn on "On Busy" diverting to the phone number entered.

    (32) 12345 This is the default security code.


     


    press and hold # Lets you switch between lines

    NOKIA5110/5120/5130/5190

    Go to Top
    IMEI number: * # 0 6 #
    Software version: * # 0 0 0 0 #
    Simlock info: * # 9 2 7 0 2 6 8 9 #
    Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
    Half Rate: * 4 7 2 0 #
    Provider lock status: #pw+1234567890+1
    Network lock status #pw+1234567890+2
    Provider lock status: #pw+1234567890+3
    SimCard lock status: #pw+1234567890+4
    NOKIA 6110/6120/6130/6150/6190
    IMEI number: * # 0 6 #
    Software version: * # 0 0 0 0 #
    Simlock info: * # 9 2 7 0 2 6 8 9 #
    Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
    Half Rate: * 4 7 2 0 #

    NOKIA3110

    Go to Top
    IMEI number: * # 0 6 #
    Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
    Simlock info: * # 9 2 7 0 2 6 8 9 #
    NOKIA 3330
    *#06#
    This will show your warranty details *#92702689#
    *3370#
    Basically increases the quality of calling sound, but decreases battery length.
    #3370#
    Deactivates the above
    *#0000#
    Shows your software version
    *#746025625#This shows if your phone will allow sim clock stoppage
    *4370#
    Half Rate Codec activation. It will automatically restart
    #4370#
    Half Rate Codec deactivation. It will automatically restart
    Restore Factory Settings
    To do this simply use this code *#7780#
    Manufacturer Info
    Date of Manufacturing *#3283#
    *3001#12345# (TDMA phones only)

    This will put your phone into programming mode, and you'll be presented with the programming menu.
    2) Select "NAM1"
    3) Select "PSID/RSID"
    4) Select "P/RSID 1"
    Note: Any of the P/RSIDs will work
    5) Select "System Type" and set it to Private
    6) Select "PSID/RSID" and set it to 1
    7) Select "Connected System ID"
    Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours,
    ask your local dealer for it.
    Select "Alpha Tag"
    9) Enter a new tag, then press OK
    10) Select "Operator Code (SOC)" and set it to 2050
    11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
    12) Power down the phone and power it back on again
    ISDN Code
    To check the ISDN number on your Nokia use this code *#92772689#

    Ericsson Go to Top
    Ericson T65

    *#05# Fake Insert puk screen Press no to exit

    Ericsson T20
    MENU tecnichal Info
    [type] >*<<*<Displays>*<<**<Network>*<<*<menu>*<<**< menu Personal Info
    Network and Subnetwork : NCK and NSCK
    <and> are the right and left menu's keys
    Ericsson T18s/T10/A1018s
    >*<<*<* software
    CXC125065 Internal product code
    PRG
    970715 1515 Software version and SW rev.
    <* CLR <><**
    >*<<*<*> Displays texts and messages in the phone
    It will be displayed " TEXT " then push YES
    <and> are the right and left menu's keys
    !!!><Control>*<<*<*
    Options :
    1) service Info
    info Software
    Simlock
    Configuration

    2) Service Test
    Display
    Led/Illumination
    Keyboard
    ringer
    Vibration
    Headset
    Microphone
    Clock

    3)Text's name List
    Info personal : >*<<**<

    SIM Locking ( 8 digits' code ) ( it could harm your phone )
    1) Network
    2) Subnetwork
    3) SP
    4) Corporate

    Siemens

    Siemens C25

    Go to Top
    IMEI number: * # 0 6 #
    Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
    Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1

    Bosch

    IMEI Number: * # 0 6 #
    Dafault Language: * # 0 0 0 0 #
    Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

    Alcatel

    IMEI number: * # 0 6 #
    Software version: * # 0 6 #
    Net Monitor: 0 0 0 0 0 0 *

    Samsung

    Samsung SGH600/2100DB

    Go to Top
    IMEI number: * # 0 6 #
    Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
    Net Monitor: * # 0 3 2 4 #
    Chaning LCD contrast: * # 0 5 2 3 #
    Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
    Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
    Reset pamieci CUSTOM: *2767*2878#
    Battery state: * # 9 9 9 8 * 2 2 8 #
    Alarm beeper: *#9998*289#
    Vibra test: *#9998*842#
    .:: Dancall ::.
    IMEI number: * # 0 6 #
    Software version: * # 9 9 9 9 #

    Philips

    *#3333*# Displays the blocking list.
    *#7489*# Displays the security code.
    *#06# Displays the IMEI number.
    *#8377*# Displays the SW info.

    Panasonic

    Panasonic gd90 gd93

    Go to Top
    *#9999# SW - Type the code on switch on , during network seek
    -Vers. SW and production code
    Enable ringing and vibration contemporarily
    Enable vibration with # then increase volume with "tone menu "
    Panasonic gd70
    *#9999# SW - Type the code on switch on , during network seek
    -Vers. SW and production code
    Enable ringing and vibration contemporarily
    Enable vibration with # then increase volume with "tone menu "

    Acer

    Acer V 750

    *#400# Display Adc/ Set Cal-Value -
    *#402# Set LCD Contrast
    *#403# Display Errors Info
    *#300# Display Info Hw & Sw
    *#301# Menu Test
    *#302# Menu Acoustics
    *#303# (Settings saved) Set English language?
    *#307# Menu Engineering
    *#311# Reset Phone Code - [ Also reset Security Codes ! ]
    *#330# (Execute not success) [ unknown ]
    *#331# (Service deactivated) [ unknown ]
    *#332# (Service unavailable)[ unknown ]
    *#333# (Execute not success)[ unknown ]
    *#351# (Service unavailable) [ unknown ]
    *#360# (Invalid input)[ unknown ]
    *#361# (Invalid input) [ unknown ]
    *#362# (Invalid input) [ unknown ]
    *#363# (Invalid input) [ unknown ]

    Genie
    Genie DB

    Go to Top

    *#06# IMEI.
    *#2254*# Near Cell Mode.

    For every received BTS will be displayed :
    Current channel and 2 channel levels

    *#06# IMEI
    *#2558# time of network connection ( D/H/M )
    *#2562# Fores reconnection to network
    !!!*#7489# Dispalys and modify phones' security code!!!
    !!!*#3377# SIM lock information !!!
    *#7378# SIM card Informations : supported phase name and tipe
    *#7693# Enable/disable "Sleep Mode"
    *#8463# State of "Sleep Mode"
    *#2255# Debug Call Mode enable/disable
    *#3333*# Displays the blocking list.
    *#7489*# Displays the security code
    *#06# Displays the IMEI number
    *#8377*# Displays the SW info.

    NEC

    NEC db2000

    Go to Top
    *#2820# software vers.
    IMEI *#06#
    Reset *73738# (send?)
    SP Lock info:
    * # 3210 # (send?)
    Network barring info : *#8140# (send?)
    ( it could harm your phone )
    SIM lock it could harm your phone )
    *#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
    #4960* password # (send?) unlock
    [password] [8 digits]
    Net Lock
    *#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
    #7320* password # (send?) unlock
    [password] [ 8 digits]
    Net Lock 2:
    *#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
    #2220* password # (invio?)unlock
    [password] [8 digits]
    Unlock subnetwork
    *#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
    #1110* password # (send?) unlock
    [password] [n� 8 cifre]
    ( it could harm your phone )
    .:: Trium ::.

    Trium Geo/Geo @ - Astral - Cosmo -Aria

    Enter the menu and type *
    A new menu will be displayed :
    Application : SW version and battery's voltage


    Trium Galaxy
    Push * and type 5806: Production date and SW version

    Telit
    Telit GM 810

    Go to Top
    MONITOR - technical menu - : type ++++ and push OK.
    Adiacent cells list : # and *
    Now if you push OK the phone displays battery ' s voltage and temperature
    .:: Sagem ::.
    Sagem MC959/940
    Select commands' menu and push *
    Displays a new menu' :
    Appli : software vers. and battery's voltage
    Eprom
    Sim Lock
    Test LCD: display test , green/red and vibration
    Sagem MC920

    Select commands' menu and push *
    Displays 5 new menus :

    1 APPLI
    VERSION ( SW)
    BATTERY (voltage )
    2 PROM (IMEI)
    3!!! SIM LOCK (10 digits code requested ) !!!
    4- NETWORK (returns : OPTION NOT AVAILABLE)
    5- TEST LCD
    SYMBOL 1 (LCD)
    SYMBOL 2 (test2 LCD)
    BLACK (all icons and carachters displayed )
    FOR PHOTO (welcome message and time )
    VIBRATOR (vibration test )

    Sony

    Sony CMD Z5/J5

    Go to Top
    Vers. SW :
    Without SIM , switch on phone and type l *#7353273#

    Eprom

    !!! Sim Lock [10 digits code ] ( it could harm your phone )
    NETWORK : OPTION NOT AVAILABLE
    Test LCD: display test of the green/red leds and vibration
    Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
    Push * and type 621342 :enables/disables network monitor 2
    Push * and type 5807 : Serial Number Software Vers.
    Push * and type 936505: IMEI -- Software Vers.
    TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
    Push * and type 362628: ISMI BLOCK (UNKNOWN)
    Push * and type 476989: NS BLOCK (UNKNOWN)
    Push * and type 482896:CP BLOCK (UNKNOWN)
    Push * and type 787090: ? BLOCK (UNKNOWN)
    Push * and type 787292 : block current network
    !!! Push * and type 967678: SP LOCK!!!
    Push * and type 850696:Warm Start ( ENABLE/DISABLE)
    Push * and type 3926 : Swicth off phone
    Push * and type 5806: Production date and SW version

    Motorola

    Motorola V3688

    Go to Top
    IMEI *#06#
    Enhanced Full Rate Codec EFR
    Enable EFR : [][][] 119 [] 1 [] OK.
    disable EFR : [][][] 119 [] 0 [] OK
    .:: Tips and Tricks ::.
    Send an E-mail from your GSM

    From your telephone you can send an email to whichever E-mail customer of the Internet network.

    The e-mail will be sent to the maximum of within an hour from the reception.

    The sended message will contain in luminosity the telephone number of the sender.

    In order for sending e-mail, send an SMS with this syntax (always separated by spaces):

    EMA [email protected] text-of-your-email

    Example: in order to send an email to [email protected], do the following:

    EMA [email protected] text-of-your-email

    if your phone cant print @ replace it with a !

    EMA johon!doe.com text-of-your-email

    And then send this message to the folloving number: +39 338 8641732
    Free SMS Center numbers

    Go to Top


    From your telephone you can send SMS messages of 160 char. max. to another GSM phone

    Your message will be sent through an SMS Center (usually the one that gave your provider)

    You pay a little fee depending of your provider, BUT YOU WILL HAVE TO PAY something

    In order for sending SMS without paying anything, you got to change your SMS Center number with these one

    +491722270300 or +358405202999 or +352021100003
    Codes (that they dont tell you in the manual)

    To check the IMEI (International Mobile Equipment Identity) type: *#06#

    Information you get from the IMEI:
    XXXXXX XX XXXXXX X
    TAC FAC SNR SP

    TAC = Type Approval Code (first 2 digits = country code).

    FAC = Final Assembly Code (For Nokia phones FAC=10).

    SNR = Serial Number.

    SP = Spare (always SP=0).

    To check the phone's software (firmware revision information) type: *#0000# ( or for some phones outher then Nokia 61XX you

    can try *#model nummber# ex. for 8110 *#8110#)

    Information you can get from the phone's software version:
    V 3.14
    28-11-97
    NSE-3

    1st line: Software version.
    2nd line: The date of the software release.
    3nd line: Phone type, .

    Some versions and dates:

    V 3.14 28/11/97

    V4.33 11/03/98

    V 4.73 22/04/98

    V 5.24 14/9/98
    Pin-Out Diagram for the 6110

    Go to Top
    1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
    2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
    3 - XMIC MIC INPUT 60mV - 1V
    4 - SGND SIGNAL GROUND
    5 - XEAR EAR OUTPUT 80mV - 1V
    6 - MBUS 9600 B/S
    7 - FBUS_RX 9.6 - 230.4 KB/S
    8 - FBUS_TX 9.6 - 230.4 KB/S
    9 - L_GND CHARGER / LOGIC GND
    Revealing Headphone and Car-Kit Menus

    Think about this: If you do these tricks the new menus can not be erased after the procedure. But it's not dangerous or

    harmful for your phone

    To enable the headset-function, you have to short-circuit the "3" and "4". After a short time there is "Headset" on the

    display Now, menu 3-6 is now enabled!

    To enable the carkit-function you have to short-circuit the "4" and "5". After a short time, "Car" is shown on the display

    and the menu 3-7 is enabled!!
    This Trick is for you how want to hear more then your supposed to ! Go to Top
    If you short-circuit the left and the right contact with the middle contact ("3", "6" and "9") the Nokia Software hangs! The

    profile "Headset" will be activated. Before you do this, just active the "auto call receive" function in the headphone

    profile and set the ringing volume to "mute" Now you can use your phone for checking out what people are talking about in a

    room. Place the phone somewhere stratidic and call your phone! The phone receives the call without ringing and you can listen

    to what people are talking about! .....gr8...
    Serial numbers on your 6110

    For more info type: *#92702689#
    The first screen gives you the serial and IMEI number.
    Then there is the Date of Manufacture: ex. Made 1297
    Then there is the Purchasing Date: ex. Purchasing Date 0298
    Then there is the last Repair Date: ex. Repaired: 0000

    Note: you must turn off the phone to exit after this test, because of the last function, "transfer user data" which doesn't

    work as "standard"....You can use this mode only to transfer all Calender, Profile and Callers Group Information to another

    phone (eg. if you are replacing phone or configuring phones for use within your company or when a particular phone doesn't

    works correctly )
    Activating and deactivating EFR and HFR, on your 6110

    *3370# to activate Enhanced Full Rate - Makes calls sound better, but decreases the battery life by about 5%.

    #3370# to deactivate Enhanced Full Rate

    *4720# to activate Half Rate Mode - Drops call quality, but increases battery life by about 30%.

    #4720# to deactivate Half Rate Mode

    this code...for all nokia s60 mobiles.....
    *#7370# Restores all original settings....This one formats the cell totally.....n after restart we get a brand new "type" phone.......



  2. #2
    Rastha
    Guest

    Thank you very much

    The information are very useful!
    Thank you friend!

  3. #3
    coolestnapster
    Guest
    rrrrrrrrrrrreeeeeeeeeeeeepppppppppppoooooooooossss ssssssstttttttttttttttt

    hey sorry pavan but its a repost dear

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)







Similar Threads

  1. SECRET CODES FOR CHINA MOBILE
    By sameerbaba in forum Knowledge Sharing
    Replies: 2
    Last Post: 07-29-2009, 03:54 PM
  2. Universal Codes For Cell Phones And Advanced Tricks
    By mrina in forum Smartphones and Tablets
    Replies: 3
    Last Post: 11-14-2008, 11:26 AM
  3. NOKIA MOBILE SECRET CODES
    By sunnyajmal in forum Sms Collection
    Replies: 1
    Last Post: 09-17-2008, 05:13 PM
  4. All Phones Codes
    By zone in forum Smartphones and Tablets
    Replies: 1
    Last Post: 08-28-2007, 08:23 PM
  5. Now Come LAN-Equipped Mobile Phones
    By darani in forum Smartphones and Tablets
    Replies: 0
    Last Post: 12-03-2006, 01:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Get Daily Forum Updates

Get Most Amazing E-mails Daily
Full of amazing emails daily in your inbox
Join Nidokidos E-mail Magazine
Join Nidokidos Official Page on Facebook


Like us on Facebook | Get Website Updates | Get our E-Magazine